There are a number of benefits to owning a high-quality aluminum pool screen enclosure. Through the structure, animals, bugs, debris, and dirt are kept at bay, allowing a stress-free environment.
You can also hang out with friends and family in a secure and comfortable environment with a quality screen enclosure in your pool area.
In the same way that any other area of your home requires constant maintenance, pool enclosures require adequate maintenance as well.
This will prolong the lifespan of your patio and pool screen enclosures. With these easy tips, you’ll be able to take good care of your patio and pool screen enclosures:
Cleaning Screen Enclosures
While screen enclosures protect your outdoor living spaces from bugs, wildlife and yard debris, they cannot repel pollen from their exteriors.
It is possible for pollen to accumulate over time on the structure’s surface, causing the enclosure to appear dirty or old. There is an easy fix for this problem.
Your patio or pool enclosure can be restored with just a little cleaning. You can basically take two approaches to general cleaning. The following methods can be used to clean screened lanais and pool enclosures:
1. Do It By Hand
You’ll only need a bucket, dish soap, a brush with soft bristles, your garden hose, and your elbow grease to clean a screen enclosure and frame by hand.
The screens and frame should be gently scrubbed with a brush and warm, sudsy water while using the brush. Let them air dry after rinsing them with your garden hose.
Be sure to pay close attention to any tough areas that may need extra attention when spraying everything down.
You can dry the screens with a snap-dryer or wipe them down with a chamois to remove excess water. You may lose all your hard work if droplets create streaks.
2. Use A Power Washer
Especially in hard-to-reach areas, a power washer is the best tool for cleaning pool enclosures. A power washer can be brought in if you prefer to put a little more power into your porch, lanai or pool enclosure cleaning.
Power washing uses hot, pressurized water that blasts grime from surfaces, but you must be careful how much power you apply.
The screens can be damaged if they are used too much. It is always best to start out on the lowest setting possible and proceed cautiously.
What Not to Do
The enclosure of the pool should never be cleaned with strong bleach. The bleach may compromise the integrity of your enclosure if it is made of aluminum.
For this reason, you should always make sure you use the appropriate brand and amount of bleach when cleaning.
Using a pressure water hose on the pool enclosure is not recommended. If this is done, the enclosure may be damaged instead of actually being cleaned.
It is ultimately your cleaning methods that will determine how long your pool enclosure will last. Take the proper cleaning steps and give your pool enclosure a longer and healthier life.
Removing Stains, Mold and Algae
Mold, pollen, and spores can sometimes form on your screen enclosure in combination with stains from various substances.
Do not give up if you encounter stubborn spots on your screen enclosure after you attempt to clean it.
Make sure you have vinegar on hand. You can scrub the problem spots with a brush or a sponge and a 50-50 solution of hot water and vinegar. After that, rinse it thoroughly with your garden hose.
In order to counteract any contact from the vinegar, soak any plants nearby in water for at least 30 minutes.
Do you wrinkle your nose when you smell vinegar? It’s okay. As the area that you cleaned dries, the stain will fade away.
Bleach can be used as a last resort if vinegar cleaning doesn’t work or if you prefer to get straight to the hard stuff.
It’s important to be cautious when using bleach since it can discolor aluminum and damage skin.
To scrub the stained areas with the solution, mix 3 parts water with 1 part bleach and wear gloves to protect your hands.
Depending on the severity of the problem, you may need to hire a professional company to clean your screen.
Consider Replacing Your Patio and Pool Screen Enclosure
Many factors can cause screen enclosures to fade over time, such as exposure to a variety of elements or being damaged beyond repair.
You would be better off investing in an excellent aluminum pool enclosure with a durable material that will last for a long time.
Keep An Eye On The Quality Of The Pool Water
It is not necessary to clean a pool on a regular basis in order to maintain a screen enclosure. Keeping your pool’s pH levels in check, adding necessary chemicals, and ensuring clean and safe water is always essential.
It can usually be detrimental to the cleanliness and quality of your pool enclosure to maintain it inappropriately.
A professional and certified company that is capable of maintaining and cleaning patio and screen pool enclosures is a wise choice when unsure how to proceed with a DIY pool screen enclosure cleaning project.
Pool Enclosures Should Be Maintained And Cleaned Regularly
It’s not just about aesthetics when it comes to keeping patios and pool enclosures sanitary. As a result of regular cleaning, mold, fungus, lichen, and algae are prevented from developing and posing a threat to your family’s health.
Untreated screen enclosure issues can lead to skin allergies, respiratory problems, and other severe health complications.
The Bottom Line
The importance of cleaning your patio screen enclosure goes beyond preserving a nice view of your backyard, but it can also extend the life of the screen and frame.
It only takes a sunny day, a gardening hose, and some warm water mixed with mild dish soap to clean your screen enclosure.
Using a soft bristle brush, clean the cage thoroughly after soaking. After the final rinse, make sure to pay attention to any hard-to-reach areas that may need extra attention.