The durability and weather-resistance of Polyword furniture make it a popular choice for outdoor furniture. It can fade over time, leaving the wood looking dull and faded due to the polyurethane finish.
Polywood furniture can be restored in several ways, so let’s take a look at how to restore faded polywood pieces.
If you’re willing to put in a little effort, you can restore polywood furniture to its original state. Let’s see how to bring some life back to your Polywood furniture if it’s looking a bit dull.
How Can Polywood Furniture Be Restored?
It is possible to restore Polywood furniture in a variety of ways. If the furniture needs refinishing, it can be sanded down and recoated with polyurethane.
It will restore your furniture’s original color. Your furniture can also be washed down with a garden hose. If your furniture has built up dirt or debris, this will remove it.
Lastly, you can clean your furniture with a power washer. It will help restore the original color of your furniture by removing dirt or debris that has accumulated on the surface.
Polywood Furniture: How To Clean & Sanitize It
Your furniture will look better quickly if you follow these cleaning methods.
The Following Supplies Are Needed
- Dry vacuum cleaner
- Mild dish soap
- 5-gallon plastic bucket
- Soft-bristle brush
- Washcloth
- Liquid bleach (optional)
Steps To Follow
- With the dry vacuum, you can quickly remove loose dirt and debris.
- In a bucket, combine the dish soap and warm water.
- (Optional step) Pour a little bleach into the container to clean and sanitize. It is recommended to mix one part bleach with two parts water.
- Soapy water should be applied to the lumber with a washcloth, and then it should be left to soak for a few minutes.
- To loosen dirt and debris, scrub the surfaces with a soft-bristle brush.
- Let your furniture air-dry after rinsing with clean water.
Tips
- When using bleach, be sure to wear chemical-resistant gloves.
- You can substitute bleach with undistilled white vinegar and baking soda for a natural alternative.
What Causes Polywood to Fade Over Time?
Polyurethane is the material used to make polywood furniture. Over time, this material can fade, even though it is very durable and weather resistant.
Sunlight is the main cause of this fading. You should protect your furniture from the sun since UV rays can damage its polyurethane finish. You can also fade your furniture if you have dirt, dust, or other debris on it.
How Should Polywood Furniture Be Maintained?
If you are concerned about the condition of your Polywood furniture, there are a few things you can do to help keep it in good condition. Keep it away from direct sunlight.
Your furniture will be protected from fading by doing this. Regularly cleaning your furniture is also important. Your furniture will become dirt and debris-free after this procedure.
Last but not least, you should reapply polyurethane to your furniture once a year. As a result, your furniture will be protected from the sun as well as from dirt and debris.
The Best Way To Restore Faded Colors Is To Stain Or Paint Them
A stain or paint can be applied in order to restore faded colors on polywood furniture. To determine if a paint or stain will work on your furniture, test a small area first.
In this way, you can ensure the color is what you want, and that the furniture finish will not be damaged.
Use a soft cloth to remove any excess stain or paint once it has been applied. Before using the furniture, let the stain or paint completely dry.
Use Sandpaper To Remove Scratches
Scratches can be removed from polywood furniture by sanding them with sandpaper. In order to protect the furniture’s finish, fine-grit sandpaper should be used.
You should sand with the grain of the wood while sanding. Remove any dust with a soft cloth after removing the scratch.
Apply Polish Every Few Months
Polywood furniture should be polished every few months in order to keep it looking its best. Over time, this will protect the finish from dulling and restore its shine.
Use a thin layer of polish and buff it out with a soft cloth after application. When applying polish, try to avoid harsh chemicals or abrasives.
Use a UV-Resistant Protectant
It is important to use a UV-resistant protectant when applying a protectant to polywood furniture. By doing this, you will prevent the finish of the furniture from fading or discoloring when exposed to sunlight.
It is best to apply UV-resistant protectant in a thin layer and reapply it frequently if you cannot find UV-resistant protectant.
Apply a Protectant
Once polywood furniture has been cleaned and dried, it needs to be protected. You will be able to prevent the furniture finish from discoloring or fading over time by doing this. It is important to apply the protective coating evenly and thinly.
You should wait until the protectant has completely dried before using the furniture. Use a protectant that does not contain harsh chemicals or abrasives.
Dry with a Soft Cloth
A soft cloth should be used to dry polywood furniture after cleaning and rinsing. In this way, you will prevent water spots from appearing on the surface of the furniture.
Make sure you use a brush with soft bristles if you must. When drying polywood furniture, try to avoid the use of harsh chemicals or abrasives.
Rinse with Clean Water
Clean water should be used to rinse polywood furniture after cleaning. Using this method, you can remove any soap residue from the furniture’s surface.
It is possible for the furniture finish to be damaged if you do not rinse the soap residue off the furniture. When rinsing furniture, use clean water.
Use a Mild Soap
Mild soap should be used to clean polywood furniture. In this way, the finish of the furniture will be protected. It is not necessary to use stronger soap. Be sure to rinse the furniture thoroughly after using stronger soap.
Use Warm Water
Warm water is important when it comes to cleaning polywood furniture. Any dirt or grime on the furniture’s surface can be removed with this method.
Using mild soap is not necessary, although it can be helpful. Clean the furniture after you’ve used soap by rinsing it with clean water afterward.
Use a Soft Cloth
Use a soft cloth when cleaning polywood furniture. It will prevent furniture surfaces from being scratched.
Using a brush is okay as long as it is a soft-bristled one. Polywood furniture should never be cleaned with harsh chemicals or abrasives.
Things to Consider when Restoring Faded Polywood Furniture
Before restoring faded polywood furniture, it is important to inspect the piece carefully to determine what type of damage is present.
Professional restoration may be necessary for severe fading or discoloration. Professional advice should be sought if you are unsure about how to proceed.
Let The Paint Or Stain Dry Completely
It is important to let polywood furniture completely dry before applying stain or paint. In this way, you will ensure that the furniture’s finish will not be damaged and the color will last a long time.
You can rest assured that your polywood furniture will be long-lasting and beautiful if you follow these guidelines.
Ensure That The Stain Or Paint Is Applied Evenly
If you are applying stain or paint to polywood furniture, ensure that it is applied evenly. You will be able to avoid streaks or blotches in the color by doing this. If any excess is present, wipe it off with a soft cloth.
Test the Stain or Paint on a Small Area First
If you plan to stain or paint polywood furniture, test the stain or paint on a small area before using it on the entire piece.
By doing this, you can be sure that the color will be exactly what you want, and that the furniture finish won’t be damaged.
Choose the Right Type of Stain or Paint
A good stain or paint is essential when restoring faded polywood furniture. If you do this, you can be sure that the color you select is exactly what you want, and that the finish will not be damaged.
What Is the Best Way to Clean Polywood Furniture?
A mild soap and water solution is the best way to clean polywood furniture. Alternatively, you can use a pressure washer to clean polywood furniture.
Be careful not to damage the furniture by using a high setting. A diluted bleach solution works well for removing tough stains.
If you want to be sure the bleach solution won’t damage the finish on the furniture, test it on a small area first.
The furniture should be rinsed out with clean water after cleaning and allowed to air dry. Avoid harsh chemicals and cleaners.
Can You Leave Polywood Furniture Outside?
Polywood furniture can be left outside. In addition to being resistant to the elements, polywood furniture will not get damaged by the sun, rain, or snow.
If left in direct sunlight for a prolonged period of time, polywood furniture may fade.
A UV-resistant sealant or moving your polywood furniture into a shaded area can help you avoid this problem. To ensure that the sealant does not damage the furniture’s finish, test it on a small area first.
Final Words
The durability and weather-resistant properties of polywood make it an excellent choice for outdoor furniture.
This furniture’s polyurethane finish, however, can fade over time. As we discussed in this blog post, there are several ways to restore the faded finish of Polywood furniture.
By restoring your Polywood furniture a little bit, you can prevent it from deteriorating further. To revive your Polywood furniture that has become a bit lacking in style, follow these tips!
