How To Drain An Above Ground Pool With A Garden Hose?

A garden hose is one of the most versatile tools in any homeowner’s toolbox. It can be used to clean up a spill, water plants, wash cars, or drain a pool.

Yes, you read it right. You can use a garden hose to drain a pool. To be more precise, you can use it to drain an inflatable pool.

Pool owners are at risk of pool contamination such as algae, debris, dirt, and rat droppings. Some of the most common dangers include microbial contamination, chemical contamination, and physical damage.

You need to have your pool regularly cleaned to prevent these problems from happening. Unfortunately, professional cleaners can be very costly and time-consuming.

Siphoning the water out of a pool with a garden hose is a common way to drain it. However, if you want to do this job efficiently and effectively, you need to ensure that the hose is equipped with an appropriate nozzle.

Siphoning the water out of a pool is not an easy task. First, you need to make sure that you do it slowly and carefully so as not to damage the pool.

You can use a garden hose for this purpose, but make sure that you don’t over-siphon and drain too much water from the pool at once.

Siphoning Water From A Pool With A Garden Hose

Siphoning Water From A Pool With A Garden Hose

This method works for any size of the pool. It can also be used for draining small pools and pools with complicated drainage systems. With this method, you can save yourself the hassle of going to the hardware store.

Or trying to find something that will fit your pool’s drainage system and still work. Try this simple method with a garden hose if you’re looking for an easy way to drain your pool.

Step 1

An outdoor faucet is attached to the other end of the garden hose while one end is submerged in the pool.

The hose should be connected to the faucet on one end. You should submerge the other end of the hose completely in the pool.

Step 2

The hose should be able to handle a full stream of water rather than a trickle when the faucet is turned on. After 30 seconds or so, turn off the water when you see water coming out of the submerged end of the hose.

Step 3

The hose should be quickly removed from the faucet, and the end from which it was attached should be kinked. Kinking the hose keeps the water inside, similar to placing your thumb over one end of a straw-filled with liquid.

Step 4

As you walk, hold the hose end higher than the water level in the pool and carry the kinked end of the hose to the drainage location.

Once you reach the designated drainage area, release the kink in your hose and place the hose end down.

Emptying A Pool With A Garden Hose Without A Pump

You can empty a pool without a pump without much difficulty. A pool can be emptied within a very short amount of time without scooping or dumping.

Getting it started may require some assistance, but once it starts draining, you can simply sit back and enjoy.

Emptying A Pool With A Garden Hose Without A Pump

Step 1

A water hose should be positioned in the pool at one end. Push it all the way to the bottom.

Step 2

You will now need to place the other end of the hose near the drain where you want to drain the water. In order to drain the pool faster, you can use more than one hose.

Step 3

You can siphon water out of the pool by placing your mouth on the hose and repeatedly sucking until you see the water flowing out. Spit it out. Be careful not to swallow it.

Step 4

Water will flow until air enters the end of the hose that is in the pool. In this case, it will continue to flow until it reaches the end of the hose.

As a result, you are allowing gravity and air displacement to work to drain your pool.

Step 5

Always make sure that your pool hose or hoses are flowing and that they remain submerged in the water.

Draining A Small Inflatable Pool With A Garden Hose

The process of draining a small inflatable pool with a garden hose is pretty straightforward. You won’t have to use a wet vac or a pool pump.

The following methods can be used to drain your above-ground pool, but if you prefer to use your garden hose, and don’t have the extra equipment, check out the rest of this article.

Draining A Small Inflatable Pool With A Garden Hose

Step 1

The garden hose should be connected to a nearby faucet. Ensure that all the air in the hose is removed by holding the other end of the hose above the rest of the hose and waiting until the water starts coming out.

Step 2

Hold both ends of the hose in each hand, holding the water in the hose as you unhook it from the faucet. One end of the hose should be submerged in the pool near the center.

Step 3

The other end of the hose should be placed below the pool water at the location where you want all the water to escape. The water should then flow in the opposite direction, and the pool will begin to drain.

Step 4

As a last resort, you can always push the other end of the hose into the pool and suck it to get the water flowing. This is not recommended for pools with really dirty water.

What Is The Best Way To Start A Siphon Using A Garden Hose?

What Is The Best Way To Start A Siphon Using A Garden Hose

Siphons are often complicated to start with a garden hose, and this is why people do not use a garden hose.

Instead, they use a submersible pump or utility pump. Once you master this method, draining your pool should become pretty easy for you.

Depending on how much water you want to siphon, you can either cut a few feet off each end of the garden hose or use the entire hose.

This method of draining usually requires a hose around 6 to 8 feet long. Those with larger pools may need more equipment.

In order to drain the water, simply place one end of the siphon tube inside the pool and the other outside. Using weight is one method for maintaining the hose end in the water.

Ensure that the water level at the end of the pipe is lower than the water level in the pool. Then, start the water moving by sucking on the hose end.

If you use the manual suction method, make sure not to get pool water in your mouth, and make sure your garden hose is as clean as possible.

There are other ways to siphon from a pool besides the mouth, such as immersion, a drain valve, and various other tools.

An immersion strategy is a good alternative to using a garden hose to remove contaminants from pool water. Siphoning is a relatively simple process.

Cover one end of the hose with your hand and quickly pull it out of the pool while pointing below the level of the water.

Submerge the entire hose in some water and then quickly pull it out of the pool. Alternatively, if you don’t cut the hose, you may need to fill the spigot with water after connecting the hose.

What Are The Benefits Of Draining Your Swimming Pool?

You should keep in mind that the drainage location of your outlet hose or your garden hose needs to be lower than the end of the intake hose (which draws the water in).

Be careful when handling an above-ground pool, as it can be a little tricky. Additionally, you can siphon water from a pool in a variety of ways. A hose and faucet are the most common methods.

When you’re removing large amounts of water from a location, you may want to consider a hose with a large diameter.

However, you may want to consider why you’re draining your pool in the first place before experimenting with drainage methods.

Draining a pool for the replacement of the liner is the most common reason to drain a pool.

If your pool liner leaks or tears, you need to immediately replace it. Draining the pool is your only option in this case. Additional reasons for draining a pool include:

For A Pool Chemistry Update:

For pool owners, problems like chlorination locks often pose a significant problem. Adding more chlorine won’t help when chlorine locks in.

Adding chemicals to water can sometimes make the problem worse. The only way to fix the problem is to replace the water completely.

Replacing Your Pool:

The water will need to be drained before you can move your pool if you’ve invested in a new one instead of a new liner.

In Order To Add Freshwater:

You should not have to replace your pool water completely very often if you maintain your pool chemicals and PH levels properly.

You may, however, decide to start over every now and then. You can use this method to remove any bacteria present in the water.

Final Words

If you discover that your pool pump suddenly stopped working properly, it is crucial that you know how to drain the pool with a garden hose.

A bucket isn’t the best method to empty either an in-ground or above-ground pool. You now know how to drain a pool with a garden hose with this information.

Leave a Comment

AS SEEN On

Go Full DIY has gained recognition on prominent tech and design platforms, praised for its user-friendly interface and innovative approach to delivering DIY content. Join the community that tech-savvy DIY enthusiasts are talking about.

Looking for DIY advice from a professional?

Schedule a call now!